Imagine creating a Texture finish with the use of a Brush & Roller. Ezycoat Siena has now made this possible. Like its predecessors Ezycoat Siena is a decorative, hard wearing and durable paint systems, Ezycoat Siena textured paint has been specifically designed to not only protect but to provide an extra dimension of texture finish in comparison to a normal paint.
Ezycoat Siena has been developed based on the principals as already adopted for the existing range of Ezycoat Render, Texture, and Paint Finishes. Ezycoat Australia has been able to further extend on its already proven track record to produce a series of texture products which have been able to bring together the aesthetic features of troweled on textures with the simplicity of paint application to produce a series of Ezycoat Textured Paints that are second to no other paintable decorative finish available on the market.
Ezycoat Siena is a more refined and subtle finish. Its fine nature makes it ideal as a finish to surfaces that would be better suited to a render sand like finish. Its paintable nature allows the applicator to control the deired finish and pattern from a regular sand finish through to an inscribed repetitive texture pattern. Its finishes are limited only by the imagination of its user. Using the latest advancements in raw material technology these finishes unlike those of its ancestors are very durable and flexible making them ideal for our current climate and building designs.
Description: Ezycoat Siena brings a new dimension to paint systems. Its heavy bodied texture allows it to be applied like a paint however when finished provides a smooth and even texture. The many different styles & methods of finishing the Ezycoat Siena allows for endless styles to be achieved.
Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene Cladding, Koolwall Panel, Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.
Mixing Procedure: Ready to use from the Pail.
Application Method: Ezycoat Siena can be applied by roller and then with the use of a long bristle brush various patterns can be worked into the finish.
Packaging: 15 Lit. Plastic Pails
Coverage: 40 to 45 sqm. per Pail. *Consumption will varying depending on surface to be coated
Ezycoat Siena is a specially designed pigmented coating system for application over such products as EzySkim Render, Ezypump, ECA, Super 6 and Conventional Render. Ezycoat Siena is suitable for application over nonrendered brickwork, blockwork and various other non-rendered masonry surfaces.
The final product will produce a protective decorative coating that is durable, water resistant and highly wear and U.V. resistance. It’s extra thick film forming ability and properties enable Ezycoat Siena to maintain excellent transpiration properties.
Prior to application of the Ezycoat Textured Paint Finishes on to a surface it is essential that the surface be free of any contaminants that may affect the performance of the textured paint system. The coating sequence must follow the application specification sequence.
Ezycoat Siena Application Specification Sequence*
|Coating 1.||1 Coat Ezycoat Ultrafine Sealer Drying time 2 hrs|
|Coating 2.||1 st Coat Ezycoat Siena Drying time before recoat 5-6 hrs depending on weather conditions|
|Coating 3.||2 nd Coat Ezycoat Siena Full cure at 12 Hours after completion depending on weather conditions.|
* With some darker colours it may be necessary to apply a coat of Ezycoat Membrane in order to
Maintain long term colour. This will be at the discretion of the Painting Contractor to determine or if in doubt contact
our offices for further advice.
It is recommended that the process of cutting in, be carried out at the same time as rolling or applying the Ezycoat Siena on the walls so as to maintain a wet on wet application. This will reduce the effect of application marks on the wall. Always try to apply Ezycoat Siena in shaded areas out of direct sunlight.
Ezycoat Siena are to be applied only by trades persons holding a license for this trade as recognised by the legislative building authority for the relevant state to which the work is being carried out. Misuse of this product and/or noncompliance with technical specifications will void any warranties whether verbal or written.
Active Building Systems Pty Ltd reserves the right to change, update and republish these specifications without any notice. It is the user’s responsibility to attain the most current publication of Ezycoat Specifications from Active Building Systems Pty Ltd.
15 Lit. Pail
|40 to 45 sqm||Application by long nap
roller followed with woolen
|Base||Water||Wash up in water|
|Curing Time||12 Hrs||Depending on weather conditions|
|Colour||Various-Tintable||Colours Available on Request|