Ezycoat
Ceiling Texture

Enquire Now

Ezycoat Roma

Following in the footsteps of Ezycoat decorative, hard wearing and durable paint systems, Ezycoat Roma textured paint has been specifically designed to not only protect but to provide an extra dimension of texture finish in comparison to a normal paint.

Ezycoat Roma has been developed based on the principals as already adopted for the existing range of Ezycoat Render, Texture, and Paint Finishes. Ezycoat Australia has been able to further extend on its already proven track record to produce a series of texture products which have been able to bring together the aesthetic features of troweled on textures with the simplicity of paint application to produce a series of Ezycoat Textured Paints that are second to no other paintable decorative finish available on the market.

Ezycoat Roma unlike the Ezycoat Corsa produces a more refined and heavy clay like finish without the heavy gritty look associated with some texture finishes. It tends to simulate those finishes of yester year. Its paste like nature allows the applicator to enter a world of creativity by applying it and creating patterns that could once only be achieved by masters in the industry and now allowing everybody to be creative geniuses. Using the latest advancements in raw material technology these finishes unlike those of its ancestors are very durable and flexible making them ideal for our current climate and building designs.

Ezycoat Roma

Description: Ezycoat Roma unlike the Ezycoat Corsa produces a more refined and heavy clay like finish without the heavy gritty look associated with some texture finishes. It tends to simulate those finishes of yester year. Its paste like nature allows the applicator to enter a world of creativity by applying it and creating patterns that could once only be achieved by masters in the industry and now allowing everybody to be creative geniuses.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene Cladding, Koolwall Panel, Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Roma can be applied by roller and then finished with a woollen mit to produce the desired finish or applied directly out of the bucket by woollen mit

Packaging: 15 Lit. Plastic Pails

Coverage: 40 to 45 sqm. per Pail. *Consumption will varying depending on surface to be coated

  • Use
  • Use

    Ezycoat Roma

    Contact Us

    1300566592

    Using the latest advancements in raw material technology these finishes unlike those of its ancestors are very durable and flexible making them ideal for our current climate and building designs.

    Ezycoat Roma is a specially designed pigmented coating system for application over such products as EzySkim Render, Ezypump, ECA, Super 6 and Conventional Render. Ezycoat Roma is suitable for application over nonrendered brickwork, blockwork and various other non-rendered masonry surfaces.

    The final product will produce a protective decorative coating that is durable, water resistant and highly wear and U.V. resistance. It’s extra thick film forming ability and properties enable Ezycoat Roma to maintain excellent transpiration properties.

  • Application
  • Application

    Ezycoat Roma Mixing Procedures

    Contact Us

    1300566592

    Prior to application of the Ezycoat Textured Paint Finishes on to a surface it is essential that the surface be free of any contaminants that may affect the performance of the textured paint system. The coating sequence must follow the application specification sequence.

    Ezycoat Roma Application Specification Sequence*

    Coating Sequence Product
    Coating 1. 1 Coat Ezycoat Ultrafine Sealer Drying time 2 hrs
    Coating 2. 1 st Coat Ezycoat Roma Drying time before recoat 5-6 hrs depending on weather conditions
    Coating 3. 2 nd Coat Ezycoat Roma Full cure at 12 Hours after completion depending on weather conditions.

    * With some darker colours it may be necessary to apply a coat of Ezycoat Membrane in order to
    Maintain long term colour. This will be at the discretion of the Painting Contractor to determine or if in doubt contact
    our offices for further advice.

    It is recommended that the process of cutting in, be carried out at the same time as rolling or applying the Ezycoat Roma on the walls so as to maintain a wet on wet application. This will reduce the effect of application marks on the wall. Always try to apply Ezycoat Roma in shaded areas out of direct sunlight.

  • Technical Spec
  • Technical Spec

    Ezycoat Roma

    Contact Us

    1300566592

    Ezycoat Roma is to be applied only by trades persons holding a license for this trade as recognised by the legislative building authority for the relevant state to which the work is being carried out. Misuse of this product and/or noncompliance with technical specifications will void any warranties whether verbal or written.

    Active Building Systems Pty Ltd reserves the right to change, update and republish these specifications without any notice. It is the user’s responsibility to attain the most current publication of Ezycoat Specifications from Active Building Systems Pty Ltd.

  • Data Sheet
  • Data Sheet

    Ezycoat Roma

    Contact Us

    1300566592

    Consumption
    15 Lit. Pail
    40 to 45 sqm Application by long nap
    roller followed with woolen
    Mit.
    Base Water Wash up in water
    Curing Time 12 Hrs Depending on weather conditions
    Colour Various Colours Available on Request
    Classification Non Hazardous  
     
    Ezycoat Roma should not be applied at temperatures below 7°C or when there is the possibility of rain. The durability of the product in its original confection is guaranteed for 1 year as long as it is not exposed to direct sunlight or temperatures below 4 degrees.
     
    Ezycoat Roma is not suitable for use in areas prone to water logging, submersion, continually damp and/or below ground. Walls were Ezycoat Roma is to be applied must be free draining. In the case of retaining walls the rear of the wall must be engineered to prevent any penetration of moisture or water through the wall in to the rear of the Ezycoat Roma. Failure to do so will result in damage to the Ezycoat Roma and is not covered by warranty.
  • Downloads
  • Downloads

    Ezycoat Roma Downloads

    Contact Us

    1300566592

    Gallery

    Click here to find out how our
    products can benefit your next job