All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT SAND 800

Description: Ezycoat Sand 800 is a pre blended Acrylic Texture that produces a granular sand like finish with ease of application. Its slightly coarse grain and irregular particle size gives it a unique and plush finish.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready for use from the pail.

Application Method: Ezycoat Sand 800 is applied by steel trowel and finished using a plastic float or a sponge for a sand finish.

Packaging: 15 Lit. Plastic  Pails.

Coverage: 8 to 10 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


 

All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT SANDSTONE

Description: Ezycoat Sandstone is a pre blended Acrylic Texture that has been produced from evenly graded quartz particles to produce a coarse yet uniform granular finish.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Skim Render is applied  by Steel Trowel , ruled and then sponge finished for best results.

Packaging: 15 Lit. Plastic  Pails.

Coverage: 8 to 10 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


 

All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT QUARTZITE COARSE

Description: Ezycoat Quartzite Coarse has been specifically designed as a top coat to various cement rendered, skim rendered and cladded surfaces. Its coarse granular appearance makes it versatile for use over many different surfaces.  Ezycoat Quartzite is a pre blended Acrylic Texture that has been produced from evenly graded quartz particles to produce a coarse yet uniform granular finish.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Quartzite Coarse  is applied  by Steel Trowel and then finished with a plastic float.

Packaging: 15 Lit. Plastic  Pails.

Coverage: 8 to 10 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


 

All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT QUARTZITE FINE

Description: Ezycoat Quartzite Fine is an acrylic texture finish. It consists of specially modified & highly refined quartz sand mixed with binders integrated with in a mixture of acrylic emulsion and pigments. This decorative granular finish is an excellent addition to our family of granular aesthetic finishes such as Ezycoat Sandstone and Sand 800. Ezycoat Quartzite Fine gives you versatility in extending the decorative finish parameters.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Quartzite Fine  is applied  by Steel Trowel and then finished with a plastic float.

Packaging: 15 Lit. Plastic  Pails.

Coverage: 8 to 10 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


 

All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT POLYMER HB

Description: As building materials change the need also arises for the coating application and products to follow suit. Traditionally the increased application thickness of renders was reserved to cement renders on brick & cement blocks. However now with the development of Ezycoat Polymer High Build it is possible to use the same theory on more difficult building panel products such as Fibre cement sheeting and AAC. Ezycoat Polymer Render can be built up in thickness to straighten out cladding which would otherwise follow the frame to which it is fixed. Its specially formulated acrylic base provides ease of use and caters for those more difficult situations so as to produce a true and straight surface for the application of the final decorative coating.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Polymer High Build  is applied  by Steel Trowel and then finished with a plastic float.

Packaging: 15 Lit. Plastic  Pails.

Coverage: 4 to 10 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


 

All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT POLYMER RENDER

Description: Ezycoat Polymer Render has been specifically designed to achieve certain qualities which cannot be attained by dry mix modified cement render. It produces a render like finish with excellent adhesion and flexibility and can be applied to thickness of 1.5 to 2 mm in any one application. Specifically designed for use over flexible cladding systems and pre rendered surfaces. It is very durable & hard wearing.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Polymer Render  is applied  by Steel Trowel and then finished with a plastic float or for best results finish with a sponge float for a render finish.

Packaging: 15 Lit. Plastic  Pails.

Coverage: 8 to 15 sqm. per Pail. per Pail. *Consumption will varying depending on surface to be coated

 


 

All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT POLYMER FINE

Description: Ezycoat Polymer Fine is essentially a full acrylic render that contains fillers and binders of the highest quality integrated with a very fine extensively graded quartz sand that makes it ideal for thin section rendering on a variety of cladding mediums. It’s very fine quartz makeup allows it produce a finish on a variety of surfaces that were once only possible it simulate with a traditional scrub fine render finish.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Polymer Fine  is applied  by Steel Trowel and then finished with a plastic float or for best results finish with a sponge float for a scrub fine render finish

Packaging: 15 Lit. Plastic  Pails.

Coverage: 15 sqm. per Pail.  *Consumption will varying depending on surface to be coated

 


 

All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT FINE FINISH

Description: Ezycoat Fine Finish is manufactured from the highest quality of raw materials available on the global market. It is essentially a full acrylic fine render that contains fillers and binders of the highest quality integrated with a very fine extensively graded quartz sand that makes it ideal for thin section rendering on a variety of cladding mediums. Its high volume of Pigment makes it ideal for tinter acceptance and colour control. Its very fine quartz makeup allows it produce a finish on a variety of surfaces that were once only possible to simulate with a traditional scrub fine render finish.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Fine Finish  is applied  by Steel Trowel and then finished with a plastic float or for best results finish with a sponge float for a scrub fine render finish.

Packaging: 15 Lit. Plastic  Pails.

Coverage: 15 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


 

All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT MONACO

Description: Ezycoat Monaco is an acrylic texture finish. It consists of a fine grade of quartz fillers mixed a granular coarse marble with binders integrated with in a mixture of acrylic emulsion and pigments. This decorative granular finish emulates a unique texture finish with random but consistent pattern of texture. Ezycoat Monaco replicates a refined yet individual finish which provides the versatility in extending the decorative finish parameters.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Monaco  is applied  by Steel Trowel and then finished with a polystyrene float.

Packaging: 15 Lit. Plastic  Pails.

Coverage: 10 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


 

All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT SCRATCH 1,2 & 3mm

Description: Ezycoat Scratch the 100% acrylic texture that has stood the test of time. Its versatility and varying methods of application have made Ezycoat Scratch a very popular finish that can adapt itself to many different styles of architecture. Manufactured from the most durable and is an acrylic texture finish. Its thick creamy consistency combined with large quartz particles is what gives Ezycoat Scratch its individuality.  Ezycoat Scratch is available in a varying of texture finishes from the more aggressive and coarse 3mm Ezycoat Scratch through to the more refined and elegant 1mm Ezycoat Scratch. Whatever your requirements Ezycoat Scratch has a finish that will suit you.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Scratch  is applied  by Steel Trowel and then finished with a polystyrene float.

Packaging: 15 Lit. Plastic  Pails.

Coverage: 6 to10 sqm per Pail. *Consumption will varying depending on surface to be coated

 

Write a Comment

Your email address will not be published.