All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT MASONRY SEALER

Description: Ezycoat Masonry Sealer is manufactured from the highest quality raw materials to produce a versatile and penetrative coating that won’t let you down. Ezycoat Masonry Sealer is recommended for use on particularly porous surfaces characterized by high absorption, such as: concrete, concrete blocks, clay bricks/blocks, autoclaved aerated concrete (AAC), plasterboard, fibre cement, villa board, etc. It is ideal for its application over old plastered surfaces, so as to reinforce and stabilize the base, for the successive application of water based coatings.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Masonry Sealer  is applied  by  either Brush or Roller. If spraying ensure a suitable tip is used.

Packaging: 15 Lit. Plastic Pails

Coverage: 100 to150 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT EXTERIOR/ INTERIOR CEILING TEXTURE

Description: Ezycoat Ceiling Texture has a thick creamy consistency and is perfectly homogeneous. It comprises of a mixture, of varied grain siliceous powders amalgamated with high quality resins and inorganic micronized white pigments. Ezycoat Ceiling Texture is available in two grades, Ezycoat Interior ceilingTexture is suitable for Interior use only & Ezycoat Exterior Ceiling Texture will exhibit the same smooth and creamy consistency of the interior ceiling texture, however provide additional protection against the harsh conditions of external weathering from the environment.

Surface Application: Suitable for application to Ceiling application only. Should not be used on vertical surfaces. Suitable over plasterboard, concrete, fibre cement sheeting * Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Ceiling Texture  is applied  by  either Brush or texture Roller or mop finish.

Packaging: 15 Lit. Plastic Pails

Coverage: 25 to 30 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT CORSA

Description: Following in the footsteps of Ezycoat decorative, hard wearing and durable paint systems, Ezycoat Corsa textured paint has been specifically designed to not only protect but to provide an extra dimension of texture finish in comparison to a normal paint.

Ezycoat Corsa: produces a heavy gritty texture which can be likened to that of a coarse bagged textured finish with the advantage of flexibility, durability and adhesive properties.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat  Corsa can be applied by roller and then finished with a woollen mit to produce the desired finish or applied directly out of the bucket by woollen mit

Packaging: 15 Lit. Plastic Pails

Coverage: 35 to 40 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT ROMA

Description: Ezycoat Roma unlike the Ezycoat Corsa produces a more refined and heavy clay like finish without the heavy gritty look associated with some texture finishes.  It tends to simulate those finishes of yester year. Its paste like nature allows the applicator to enter a world of creativity by applying it and creating patterns that could once only be achieved by masters in the industry and now allowing everybody to be creative geniuses. Using the latest advancements in raw material technology these finishes unlike those of its ancestors are very durable and flexible making them ideal for our current climate and building designs.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat  Roma can be applied by roller and then finished with a woollen mit to produce the desired finish or applied directly out of the bucket by woollen mit

Packaging: 15 Lit. Plastic Pails

Coverage: 40 to 45 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


All-Texture-ProductsAdobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT SIENA

Description: Ezycoat Siena brings a new dimension to paint systems. Its heavy bodied texture  allows it to be applied like a paint however when finished provides a smooth and even texture. The many different styles & methods of finishing the Ezycoat Siena allows for endless styles to be achieved.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat  Siena can be applied by roller and then with the use of a long bristle brush various patterns can be worked into the finish.

Packaging: 15 Lit. Plastic Pails

Coverage: 40 to 45 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT SMOOTH ROLL ON

Description: Ezycoat Smooth Roll On is a low profile style roll on texture paint. It offers a uniform and highly flexible finish while also providing an aesthetically pleasing finish that can hide many imperfections that may exist in a surface.  Ezycoat Roll On is ideal for application over precast concrete surfaces or is an excellent substitute for areas that do not require rendering or where cement render is just not in the budget.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Smooth Roll On  is applied  by  texture Roller.

Packaging: 15 Lit. Plastic Pails

Coverage: 35 to 40 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT ULTRAFINE

Description: Ezycoat Ultrafine is manufactured from the highest quality raw materials to produce a versatile and protective coating that won’t let you down. Ezycoat Ultrafine  has been developed to incorporate a fine granular sand particle that produces a textured surface that emulates a sandy render finish.  It is suitable as an overcoat to sponge finish render or to non textured surfaces that require a sand like finish.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Ultrafine   is applied  by  either Brush or Roller. If spraying ensure a suitable tip is used.

Packaging: 15 Lit. Plastic Pails

Coverage: 40 to 50 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT MEMBRANE

Description: Ezycoat Membrane  is a hard wearing durable & flexible paint system specifically designed to protect interior and exterior masonry wall surfaces. It has a thicken creamy consistency that when applied allows it to create an extra thick protective coating to the surface. Using the latest in European, technology it has been possible to develop a paint that has excellent adhesion, abrasive resistance and offers the ultimate in protection. The end result is a membrane coating that provides its user with a quality product, with ease of application.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Membrane is applied  by  either Brush or Roller. If spraying ensure a suitable tip is used.

Packaging: 15 Lit. Plastic Pails

Coverage: 50 to 60 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT FLEXICOTE

Description: Ezycoat Flexicote is revolutionary highly flexible yet durable exterior membrane paint finish for when you need that added protection against the elements. Its thickened appearance allows  Ezycoat Flexicote to be applied either as a very thick coating or rolled out to suit your needs. Flexicote’s physical properties allow it to exhibit excellent crack bridging properties that are normally reserved to non exposed water proofing coatings.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Flexicote is applied  by  either Brush or Roller. If spraying ensure a suitable tip is used.

Packaging: 15 Lit. Plastic Pails

Coverage: 50 to 60 sqm. per Pail. *Consumption will varying depending on surface to be coated

 


All-Texture-Products

Adobe_PDF_IconEzyspecs
Download

 

 

 

 


 

EZYCOAT ULTRAFINE SEALER

DescriptionEzycoat Ultrafine Sealer has beenspecially developed as a masonry primer to be used as a pre application under the more demanding Ezycoat Textured paint systems such as Ezycoat Corsa, Roma, Siena & Ultrafine finishes. Ezycoat Ultrafine Sealer is an alkali resistant concentrated Ultrafine sealer, produced from a selected range of acrylic polyvinyl copolymers in a fluid emulsion.

Surface Application: Suitable for application to Fibre cement sheeting, pre rendered surfaces, AFS, Ritek , Rendered Polystyrene  Cladding,  Koolwall Panel,  Tilt Concrete & Modakboard* Refer to Technical Data Sheets (TDS). or Ezyspec for application procedures.

Mixing Procedure: Ready to use from the Pail.

Application Method: Ezycoat Ultrafine  Sealer  is applied  by  either Brush or Roller. If spraying ensure a suitable tip is used.

Packaging: 15 Lit. Plastic Pails Colour Matching Available.

Coverage: 60 to 80 sqm. per Pail. *Consumption will varying depending on surface to be coated.

Write a Comment

Your email address will not be published.